specification
| TYPE | R1 | R2 | R3 | |
| Table cross travel (X) | mm | 1400 | 2000 | 3000 |
| Head stock travel (Y) | mm | 1390 | 1780 | 1780 |
| Table longitudinal travel (Z) | mm | 1050 | 1650 | 1650 |
| TYPE | R1 | R2/R3 | |
| Size | mm | 1120 x 1250 | 1440 x 1600 |
| Table load | kg | 4000 | 6300 |
| Table rotation | rpm | 1 | 1 |
| Stroke (W) | mm | 500 |
| Diameter | mm | 110 |
| Taper | ISO | 50 |
| Tool shank | BT | 50 |
| Pull stud | MAS II (I*)/ISO/CAT/DIN | |
| Milling spindle diameter | mm | 225 |
| Motor(cont/30 mins) | kW | 22 / 26 |
| Speed range low | rpm | 8-454 |
| Speed range high | rpm | 455-2500 |
| Max. torque | Nm | 1504 |
| X axis | kW | 6(α iF40/3000) |
| Y axis | kW | 7(α iF30/4000) |
| Z axis | kW | 6(α iF40/3000) |
| W axis | kW | 4(α iF22/3000) |
| B axis | kW | 4(α iF22/3000) |
| TYPE | R1 | R2 | R3 | ||
| Contral | Controlled axis | 5 | 5 | 5 | |
| Simultaneous axis | 4 | 4 | 4 | ||
| Rapid | X/Y/Z axis | m/min | 10/10/10 | 10/10/10 | 10/10/10 |
| W axis | m/min | 4 | 4 | 4 | |
| Feed rate | mm/min | 0 – 4000 | 0-4000 | 0-4000 | |
| Machine weight | Net weight | kg | 16000 | 19000 | 21000 |
| Dimension | Height | mm | 3370 | 3800 | 3800 |
| Floor space | mm | 6600 x 5700 | 7700 x 6200 | 7700 x 7600 | |
| Linear Scales | X/Y/Z (*OPT) | X/Y/Z (*OPT) | X/Y/Z (*OPT) | ||
| Total power rating | kVA | 76 | 76 | 76 | |
| Controller system | FANUC (0iMF) | FANUC (0iMF) | FANUC (0iMF) |
| TYPE | R1 | R2/R3 | |
| Storage | 60 | 60/90 | |
| Max. Tool dia(Adjacent) | mm | 245 ( 125 ) | 245(125) |
| Max. Tool length | mm | 400 | 400 |
| Max. Tool weight | kg | 25 | 25 |
| Tool to tool time | sec | 13 | 13 |
FATEK’s policy is one of continuous product improvement and so we reserve the right to change the specifications and prices of the models and items on this website at any time.
⇀ OPTIONS ↽
Extension Bushing
Right Angle Work Table
Dividing Plate
90 Degree Angle Head
Tool Length Probe
60 / 90T ATC
Manual Universal Milling Head
Work Piece Measurement
